Adjustment Points / Calibration Points
In this table you can enter an optional number of adjustment points or calibration points for the tool, and also modify or delete points, if you want to use a different one than the tool group default points.
Name
This is where you enter a name for the measuring point. This is what needs to be measured (calibrated) on the tool.
Value
Here you enter an original or initial value, that is used as a reference for the calibration / adjustment point.
Unit
Here you enter the unit used for the initial value.
Allowance +
Here you enter the maximum positive allowance (allowed deviation) for this checkpoint.
Allowance -
Here you enter the maximum negative allowance (allowed deviation) for this checkpoint.
T-unit
Here you enter the unit used for the allowance or deviation.
Tool
Here you enter if you use a tool for the adjustment/calibration, for example gauge block.