Please Note! Each machine included in the machine integration must be linked to a work center. The machine shall have its own unique work center. You cannot select the same work center for another employee number.Using Machine Integration
Activate this setting if the employee number is a machine.
Linked to Work Center
Here you choose to which work center the machine shall be linked.
Please Note! Each machine included in the machine integration must be linked to a work center. The machine shall have its own unique work center. You cannot select the same work center for another employee number.
Report Arrival
Check this box if the arrival to the terminal for acknowledgement of stops shall be reported for this machine. The purpose is to measure the time from stop to action, that is, the time it takes for the operator to get to the machine to resolve the stop.
Time Interval for Loading to Order (Minutes)
Here you enter a default interval for loading to order. This interval determines how often the order in the company database in MONITOR (for example 001) shall be synchronized with the machine's reporting on the order in the company's machine database (for example MM_001). The default interval is 30 minutes.
Report Quantity when Full Pallet Has Been Manufactured
If you activate this setting, an automatic reporting will be made when the machine has manufactured a full pallet. You activate this setting if you have set 0 minutes as synchronization time in the setting mentioned above. This means that no automatic synchronization will be made.
Machine Unique Time for Short Stops (Minutes)
Here you enter the excepted stop with a figure value in minutes. Two decimals will be displayed but you can enter up to six decimals. If you enter a value here, this value will override the value entered in the setting Time limit for short stops (minutes) under Machine Integration under the Workshop Info tab in the Settings procedure.
Machine Unique Code for Short Stops
Here you select the indirect code that you want to use during short stops for this machine. If you select an indirect code here, this will override the indirect code entered in the setting Indirect code for short stops under Machine Integration under the Workshop Info tab in the Settings procedure.